MFG: Cool Max

Model PS-224

Description

The product designs with LCD to show ATX power voltage. Easy to plug with ATX power 24 pin and plug in (P4/P6/P8) to show the voltage on the LCD panel.

Feature

*Easy to check ATX power supply

*Aluminum case.

*Accurate voltage indicator +/- 0.1V (+12V1/+5V/+3.3V/5VSB/+12V2/-12V)

*ATX P.G. value display

*Lower or higher P.G. values alarm

*ATX output connectors check

*Lower voltage detected alarm

*Over voltage alarm

*No voltage detected alarm

Directions For Use

1. Plug-in your ATX power 24 pin and plug-in (P4/P6/P8) into the tester

2. Turn on your ATX power supply

3. LCD shows each voltage and P.G. value on the screen automatic and you can hear 2 beep sounds.

4. ATX power output connector checking one by one

5. Plug-in (HDD/Floppy) connector and check LED light (+12V1/+5V

6. Plug-in SATA connector and check LED light (+12V1/+5V+3.3V

7. Remove Floppy con, plug SATA con, check +12V, +5V, +3.3V

8. Remove the connector after your checking

9. Do not plug-in 2 connectors into the tester at the same time

10.Abnormal voltage detected will not display on the screen.

11.No voltage detect, LL? will display on the screen.

12.When detected Voltage is lower than Min. Value, LL? will display on the screen.

13.When detected voltage is higher than table value (B), will alarm.

14.P.G. value detected lower 100ms or higher 900ms, P.G. value is abnormal and alarm.

15.When abnormal happened, it will alarm and relative digit blink on the screen

16.P.G. value detected lower 100ms or higher 900ms, P.G. value is abnormal and alarm.

17.When abnormal happened, it will alarm and relative digit blink on the screen

Each Voltage

normal range +5V, +3.3V, +5VSB is ¡À5%;

+12V1, +12V2, -12V is ¡À10%

Warranty

1 Year

 
Picture of lcd panel

Price:  $29.95(Excluding: FL Sales Tax at 7.5%)